Powerful Features
A complete simulation environment that brings your ideas to life.
Place Arduino Uno, LEDs, sensors, displays, motors, and 30+ real components on a visual canvas. Connect them with color-coded wires — just like a real breadboard.
Write real C/C++ Arduino code in a full-featured Monaco editor, or use visual Blockly blocks that auto-generate code. Switch between them seamlessly.
Hit "Run" and watch your circuit come alive. LEDs glow, servos rotate, LCD screens display text, buzzers sound — compiled with the real AVR-GCC toolchain.
Component Library
From basic LEDs to advanced I2C sensors — simulate the full Arduino ecosystem.
RFID Card (13.56MHz)
RFID Tag (Passive)
74HC00 (Quad 2-Input NAND)
74HC02 (Quad 2-Input NOR)
74HC04 (Hex Inverter/NOT)
74HC08 (Quad 2-Input AND)
74HC10 (Triple 3-Input NAND)
74HC11 (Triple 3-Input AND)
74HC138 (3-to-8 Decoder)
74HC195 (4-Bit Parallel-Access Shift Register)
74HC266 (Quad 2-Input XNOR, Open-Drain)
74HC283 (4-Bit Binary Adder)
74HC32 (Quad 2-Input OR)
74HC47 (BCD to 7-Segment Decoder/Driver)
74HC76 (Dual JK Flip-Flop)
74HC85 (4-Bit Magnitude Comparator)
74HC86 (Quad 2-Input XOR)
74HC95 (4-Bit Shift Register)
L293D Motor Driver
LM358 Comparator
Relay Module
ULN2004A Darlington Array
16-Key 4x4 Matrix Membrane Keypad
8-Channel IR Sensor Array
Color Block
DC Voltmeter
DHT11 Temperature & Humidity Sensor
DS1307 Real-Time Clock
EM-18 RFID Reader
Flame Sensor
HC-05 Bluetooth Module
HC-SR04 Ultrasonic Sensor
IR Obstacle Sensor
LDR (Light Sensor)
LM35 Temperature Sensor
MPU6050
MQ-2 Gas/Smoke Sensor
Oscilloscope
PIR Motion Sensor
Potentiometer
Push Button
RC522 RFID Reader
Soil Moisture Sensor
Switch (SPST Toggle)
TCS3200 Color Sensor
Tilt/Vibration Sensor (SW-420 style)
Arduino Uno
16x2 LCD (HD44780)
16x2 LCD (I2C Backpack)
7-Segment Display (Common Anode)
Buzzer (Piezo)
DC Bulb / Lamp
DC Fan
DC Motor
LED (5mm)
OLED Display 128x64 (SSD1306)
RGB LED (Common Cathode)
Servo Motor
Unipolar Stepper Motor
Breadboard (half-size)
Resistor
5V DC Power Supply
9V Battery
Simple Workflow
Drag components onto the canvas and wire them together visually. It's like virtual breadboarding!
Use the text editor for C++ or drag-and-drop Blockly blocks to program your Arduino.
Click "Run" and watch your project come alive in real time. Debug, iterate, and master Arduino!
Who Is It For?
Practice Arduino programming from your dorm, library, or classroom — no hardware needed. Perfect for assignments and self-paced learning.
Teach embedded systems and IoT without managing lab equipment. Every student gets their own virtual lab, accessible anywhere, anytime.
Prototype your ideas quickly before committing to real hardware. Test circuit designs, debug code, and iterate faster than ever.
Join students and makers who are learning Arduino the smart way — no soldering iron required.
Create Your Free Account →